logo
Enviar mensagem

ASLI Brand Climatic Chambers Thermal Shock Chamber

1
MOQ
ASLI Brand Climatic Chambers Thermal Shock Chamber
Características Galeria Descrição de produto Peça umas citações
Características
Especificações
Dimensão interna: W500*H400*D400mm
Precisão da análise: 0,1 graus C
Uniformidade da temperatura: +/-2,5 graus C
Material interno: Sus304 Aço inoxidável
Porta de teste: Porta única
Faixa de temperatura: -40°C~+150°C (200°C Opcional)
Escala de alta temperatura: +60°C~+150°C (200°C Opcional)
Escala de baixa temperatura: -10°C~-40°C/-55°C/-65°C
Período de exposição: 30mins
Tempo de aquecimento: TA~200°C/45mins
Tempo de resfriamento: TA~-75°C/100mins
Tempo de recuperação: ≤5min
Tempo de conversão: ≤ 5 segundos
Precisão de controle: ± 0,5 ° C.
Fonte de energia: AC220V/50/60 Hz, AC380V/50/60 Hz
Destacar:

ASLI thermal shock test chamber

,

climatic chamber for environmental testing

,

thermal shock chamber with warranty

Informação básica
Lugar de origem: Cantão, China
Marca: ASLI
Número do modelo: TS-80-A
Condições de Pagamento e Envio
Descrição de produto
ASLI Brand Climatic Chambers Thermal Shock Chamber
The Programmable Thermal Shock Test Box, also known as hot and cold impact testing machine or temperature impact test box, is designed to test material structures or composite materials under extreme temperature variations. It evaluates the material's ability to withstand rapid transitions between very high and very low temperatures, revealing potential thermal expansion-induced chemical changes or physical damage in the shortest possible time.
Suitable for testing metals, plastics, rubber, electronic materials, and more, this chamber provides valuable data for product improvement and quality assurance.
Technical Specifications
Model TS-42(A~C) TS-80(A~C) TS-150(A~C) TS-252(A~C) TS-450(A~C)
Internal Dimension W×H×D (mm) 400×350×350 500×400×400 600×500×500 700×600×600 800×750×750
External Dimension W×H×D (mm) 1400×1800×1400 1550×1950×1550 1600×2000×170 1700×2100×1750 1800×2200×1900
Temperature Range Type A: -40°C to +150°C (200°C optional)
Type B: -55°C to +150°C (200°C optional)
Type C: -65°C to +150°C (200°C optional)
Exposure Time High Temperature: +60°C to +150°C (200°C optional) - 30 minutes
Low Temperature: -10°C to -40°C/-55°C/-65°C - 30 minutes
Temperature Recovery/Conversion Time ≤5 minutes / ≤5 seconds
Control Accuracy/Distribution Uniformity ±0.5°C / ±2°C
Construction Materials Inner box: SUS 304# stainless steel
Outer box: Stainless steel or SEE cold-rolled steel with paint coating
Insulation Material High temperature resistant, high density formate chlorine ethyl acetum foam
Cooling System Semi-hermetic double-stage compressor (water-cooled type)
Hermetic double-stage compressor (air-cooled type)
Power AC220V, 50/60Hz or AC380V, 50/60Hz
Weight (Approx. kg) 450 600 750 950 1200
Key Features
  • Uses aluminum pieces to verify machine load capacity (not plastic load)
  • Sensor placement in test area rather than wind crossing, ensuring experimental effectiveness
  • Test area humidity conforms to standard requirements
  • Can expand surface temperature measurement and control dwell time to shorten test duration
  • Compatible with multiple international testing standards and conditions
  • Capable of 0°C low temperature impact testing with energy-saving operation
ASLI Brand Climatic Chambers Thermal Shock Chamber 0 ASLI Brand Climatic Chambers Thermal Shock Chamber 1 ASLI Brand Climatic Chambers Thermal Shock Chamber 2
For more information about our Programmable Thermal Shock Test Boxes, please don't hesitate to send your inquiry.
Produtos recomendados
Entre em contato conosco
Pessoa de Contato : Miss. Lily Chen
Telefone : 86-13543715035
Fax : 86-769-22851784
Caracteres restantes(20/3000)